Outback-power-systems GVFX Series Inverter/Charger Programing Manual Uživatelský manuál Strana 1

Grid-InteractiveGTFX AND GVFX INVERTER/CHARGERPrograming Manual

STACKING OPTIONSOutBack Grid-Interactive FXs can be stacked in Classic Series only. CLASSIC STACKING • Two FXs are wired to two 120 VAC output legs p

Once the MATE recognizes each FX (and OutBack Charge Controller), push and hold the rst two soft keys simultaneously to return to the MAIN menu. To

ADVchoose device:FX CC DC MATEADV/FX/PAGE 1----------------choose category:ADV INV CHGR PG2• On the ADV/FX/PAGE 1 s

ADV/FX/STACK--------P01stack MasterphaseDOWN INC DEC PORT• Stacking the FX Inverter/Chargers begins on thi

MASTERWith the Port 01 FX as the Master, press the <PORT> soft key to change the remaining Ports and designate the remaining FXs as Slaves. The

POWER SAVE LEVELS Depending on the model, each FX consumes 20-25 watts of power when it remains on, even if it isn’t actively inverting or charging.

AC ON• With the programming completed, turn the AC output breakers ON with the AC BYPASS on the AC breaker panel switched to NORMAL.Verify the AC vol

If the FX’s AC source is available, the yellow AC IN STATUS light will blink. The FX will connect to the utility grid when the voltage is within 108-1

AUXILIARY AUX FUNCTIONSThe AUX output provides a 12 VDC, 0.7 ADC max output at the AUX terminals to control either DC or AC external loads. Typic

• The screen displays <132>. Press the <INC> button until it scrolls to the password 141.ADV/PASSWORD-------------- enter

WARRANTY SUMMARYDear OutBack Customer,Thank you for your purchase of OutBack products. We make every eort to assure our power conversion products wil

ADV/FX/PG2---------------------choose category:PG1 GRID GEN PG3• Press the <PG3> soft key which leads to the ADV/FX/PAGE3 screen

LIST OF AUX FUNCTIONS• Cool Fan activates the standard TurboFan which cools the FX.• Divert DC and Divert AC allows the AUX to divert excess renewab

ADV/FX/AUX---------------P00genalert 11.5vdcon setpointDOWN INC DEC PORT • From the Remote aux output

• If a ventilation fan is only needed intermittently, the ventfan o period shuts the fan o for a user-determined time before starting up again fo

BATTERY CHARGING INSTRUCTIONSKeeping your battery bank energized is very important. Although a battery bank can last for many years if properly cared

13.614.414.4 u12.510.512.513.01411111314.61.0 hours1.0 hours1.0 hours60 cycles**20 for Grid-Tie6108208140270.5 minUSEAUTOCOOL FAN4 min9 min5 min10820

WARRANTYOutBack Power Systems Two Year Limited WarrantyOutBack Power Systems Inc. warrants that the products it manufactures will be free from def

PRODUCT REGISTRATIONYour purchase of an OutBack Power Systems product is an important investment. Registering your products will help us maintain the

10YEAR LIMITED WARRANTY (California)GTFX, GVFX and PS1 ProductsOutBack Power Systems, Inc. (“OutBack”) provides a ten-year (10) limited warranty (“Wa

1. Proof-of-purchase in the form of a copy of the original Product purchase invoice or receipt conrming the Product model number and serial number;2

2TABLE OF CONTENTSWarranty Summary...

10-Year Warranty Registration for GVFX, GTFX and PS1-California10YEAR WARRANTY REGISTRATION  CALIFORNIATo request a 10-year Limited Warranty; comple

30

European Sales OceBarcelona, ESPAÑA(+34) 600.843.845 19009 62nd Avenue NEArlington, WA 98223 USA(+1) 360.435.6030 www.outbackpower.com900-0087-01-00

OUTBACK GTFX AND GVFX CERTIFICATE OF COMPLIANCE TO UL1741UTILITYINTERACTIVE INVERTERSOutBack GTFX and GVFX inverters comply with UL1741 for utility-i

WELCOME TO THE OUTBACK POWER SYSTEMS FX SERIES INVERTER/CHARGER SYSTEMThe FX Series Inverter/Charger oers a complete power conversion system—DC to A

GRIDINTERACTIVE FX SERIES INVERTER/CHARGER PROGRAMMINGNOTE: Please see the FX and VFX Series Inverter/Charger Installation Manual to install, wire, a

The FX connected to Port 01 is always programmed as the Master. AC Breakers O DC Breakers OComponents and Connections:1. With all AC and DC breaker

AC Breakers O DC Breakers On2. With the FXs connected to the HUB, turn only the DC breakers ON and power up the components. All AC breakers should be

3. After powering up the components, connect the MATE to the HUB.a) Plug the MATE into the 1st MATE Port on the HUB.b) The MATE will power up and sh